How to Install FireGuard+

It only takes minutes

The FireGuard+ system can be set up in minutes!

We made FireGuard+ Fire System easy-to-install to encourage landlords and homeowners to meet to create a safe environment. Choose your preferred installation method.
ADHESIVE PADS
Drilling not required
SCREWS
Drilling required
1

Unbox and turn on the alarms

Unbox and turn on all the detectors by keeping pressed the main button of the alarm until you hear a beep.
2

Interlink the alarms

Once the alarms are operating, it's time to pair them. Press the main button twice on each alarm and the green light will start flashing green which means that they are in pairing mode.

When all alarms are flashing green, press the 'pairing button' on the remote to pair all the devices. FireGuard+ alarms are paired when all the lights on the detectors and the remote went off. Your alarms are now linked.
3

Attach sticker and fit to ceiling

Peel off one side of the bi-adhesive stickers provided and attach to the back plate of the alarm. Now, peel off the other side of the sticker and attach to your ceiling. Repeat with the other alarms.
4

Test your alarms

Once all the devices are fitted in the desired rooms, test the fire alarm system. Simply press the 'Test' button on the remote controller. You can also test your alarms by pressing on them.
1

Unbox and turn on the alarms

Unbox and turn on all the detectors by keeping pressed the main button of the alarm until you hear a beep.
2

Interlink the alarms

Once the alarms are operating, it's time to pair them. Press the main button twice on each alarm and the green light will start flashing green which means that they are in pairing mode.

When all alarms are flashing green, press the 'pairing button' on the remote to pair all the devices. FireGuard+ alarms are paired when all the lights on the detectors and the remote went off. Your alarms are now linked.
3

Drill holes and screw in the alarms

Use the back plate as a guide to drill holes in your ceiling. Use screws and anchors provided to fit the plate. Then, simply screw in the detectors by twisting them in the fitted plate.
4

Test your devices

Once all the devices are fitted in the desired rooms, test the fire alarm system. Simply press the 'Test' button on the remote controller. You can also test your alarms by pressing on them.