The Bundle includes FireGuard+ Smoke & Heat Alarms. These Detectors have a sealed 10 year lithium battery designed to last the full lifetime of the alarm and include a build-it radio module to allow the devices to be interconnected. This ensures the occupants to have the earliest possible warning of a fire in the property.
The Bundle also includes screws and sticky pads, to allow easy installation without the need of drilling. This Bundle is paired with an Infrared Remote Control which allows to perform the ordinary checks.
- Built-in 10 years Lithium Battery
- Easy to mount with screws or strong adhesive pads supplied
- Easy to test by pressing centre button or using the IR Remote
- Built-in Interlinked Wireless Technology
- Smoke Alarm Compliance: BS EN14604:2005
- Heat Alarm Compliance: BS 5446-2:2003
- Carbon Monoxide Detector Compliance: EN 50291-1
- This Bundle can be interlinked to other FireGuard+ Bundles
- This Bundle is suitable for the updated Scottish Fire Alarm Legislation
The FireGuard+ Smoke Alarm has a sealed 10 year lithium battery designed to last the full lifetime of the alarm and includes a built-in radio module to allow the device to be interlinked with other FireGuard+ Smoke & Heat Alarms. This Alarm is fully controllable via the IR Remote supplied.
Power Source
3V Lithium Battery
Sensor Type
Photoelectric (Optical)
Safety Standard
BS EN14604:2005
Certification
TUV and CE compliance
Max Interconnected Units
25 FireGuard+ units
Installation method
Screws / adhesive pads
The FireGuard+ Heat Alarm has a Thermistor heat sensor to measure the drastic changes in surrounding temperature. It has a sealed 10 year lithium battery designed to last the full lifetime of the alarm and includes a built-in radio module to allow the device to be interlinked with other FireGuard+ Smoke Alarms and Heat Alarms. This Alarm is fully controllable via the IR Remote supplied.
Power Source
3V Lithium Battery
Safety Standard
BS 5446-2:2003
Certification
TUV and CE compliance
Max Interconnected Units
25 FireGuard+ units
Installation method
Screws / adhesive pads
ADHESIVE PADS
Drilling not required
1
Unbox and turn on the alarms
Unbox and turn on all the detectors by keeping pressed the main button of the alarm until you hear a beep.
2
Interlink the alarms
Once the alarms are operating, it's time to pair them. Press the main button twice on each alarm and the green light will start flashing green which means that they are in pairing mode.
When all alarms are flashing green, press the 'pairing button' on the remote to pair all the devices. FireGuard+ alarms are paired when all the lights on the detectors and the remote went off.
3
Attach sticker and fit to ceiling
Peel off one side of the bi-adhesive stickers provided and attach to the back plate of the alarm. Now, peel off the other side of the sticker and attach to your ceiling. Repeat with the other alarms.
4
Test your devices
Once all the devices are fitted in the desired rooms, test the fire alarm system. Simply press the "Test" button on the remote controller.
1
Unbox and turn on the alarms
Unbox and turn on all the detectors by keeping pressed the main button of the alarm until you hear a beep.
2
Interlink the alarms
Once the alarms are operating, it's time to pair them. Press the main button twice on each alarm and the green light will start flashing green which means that they are in pairing mode.
When all alarms are flashing green, press the 'pairing button' on the remote to pair all the devices. FireGuard+ alarms are paired when all the lights on the detectors and the remote went off.
3
Drill holes and screw in the alarms
Use the back plate as a guide to drill holes in your ceiling. Use screws and anchors provided to fit the plate. Then, simply screw in the detectors by twisting them in the fitted plate.
4
Test your devices
Once all the devices are fitted in the desired rooms, test the fire alarm system. Simply press the 'Test' button on the remote controller.